iology, State Research Center of Virology and Biotechnology “Vector”, Koltsovo, Novosibirsk Region, Russia..

3PA5 IN VITRO INHALER AEROSOL DEPOSITION IN A NEW HIGHLY IDEALIZED MOUTH-THROAT MODEL, Kyle Gilbertson, Warren Finlay, YU ZHANG, Edgar Matida.

3PA6 AIRFLOW AND PARTICLE DEPOSITION IN THE LUNG AT MICROGRAVITY AND HYPERGRAVITY ENVIRONMENTS, BAHMAN ASGHARIAN, Owen Price, CIIT Centers for Health Rsearch.

3PA6 DEVELOPMENT OF SOFTWARE TO ESTIMATE DEPOSITION FRACTIONS OF AEROSOLS IN HUMAN RESPIRATORY TRACT USING ICRP'S MODEL, Kazutoshi Suzuki, National Institute for Environmental Studies.

3PA7 DISTRIBUTION OF AIRFLOW AND PARTICLE DEPOSITION IN MORPHOMETRIC MODELS OF AGE-SPECIFIC HUMAN LUNGS., OWEN PRICE, Bahman Asgharian, CIIT Centers for Health Research, Research Triangle Park, NC, USA.

3PA8 COMPARISON OF CFD PREDICTED FLOW FIELD AND PARTICLE DEPOSITION WITH EXPERIMENTALLY MEASURED FLOW FIELD (PIV) AND PARTICLE DEPOSITION IN A THREE-GENERATION LUNG MODEL., Adam Pruyne, RISA ROBINSON, Department of Mechanical Engineering, Rochester Institute of Technology, Rochester, NY, Michael Oldham, Department of Community and Environmental Medicine, University of California, Irvine, CA.

3PA9 AIRFLOW AND PARTICLE TRANSPORT IN A HUMAN NOSE, PARSA ZAMANKHAN, Goodarz Ahmadi, Philip K. Hopke, Clarkson University, Potsdam, NY, 13699-5725,Y.S.Cheng,Lovelace Respiratory Research Institute, Albuquerque, NM 87108,P.A. Baron,NIOSH, 4676 Columbia Parkway, Cincinnati, OH 45226.

4:30 PM – 6:30 PM

3PB. Aerosol Sampling Techniques

3PB1 PERFORMANCE EVALUATION OF STANDARD AND NON-STANDARD SAMPLING SYSTEMS, Erkki Lamminen, PIRITA MIKKANEN, Johanna Ojanen, Dekati Ltd., Tampere, Finland.

3PB2 PARTICULATE DISSEMINATION FLOW TUBE FOR QUANTIFYING BIOAEROSOL SAMPLER COLLECTION EFFICIENCY, DAVID ALBURTY, Andrew Page, Midwest Research Institute, Kansas City, MO; Freeman Swank, Sceptor, Kansas City, MO.

3PB3 PERSONAL RESPIRABLE SAMPLER CONTAINING FOUR IMPACTORS ARRANGED IN PARALLEL, SAULIUS TRAKUMAS, Peter M. Hall, Donald L. Smith, SKC Inc., Eighty Four, PA.

3PB4 DIRECT EVALUATION OF SOME TYPES OF STATIONARY AND PORTABLE ULTRASOUND INHALATORS FOR THE DETERMINATION OF THEIR PERSPECTIVES IN RUSSIAN MARKET, VYACHESLAV KOBYLYANSKY, Medical Sanitary Unit N122 of the Ministry of Public Health of Russia, Scientific-Practical Center on Introduction and Distribution of Medical Devices, Saint-Petersburg, Russia.

3PB5 INCREASING THE SINGLE PARTICLE COUNTING RANGE OF A CONDENSATION PARTICLE COUNTER, FREDERICK R. QUANT, Derek R. Oberreit, Quant Technologies LLC, Blaine, MN; Mark R. Stolzenburg, University of Minnesota, Minneapolis, MN.

3PB6 A LOW POWER CONSUMPTION AUTOMATIC AEROSOL MEASUREMENT SYSTEM AND ITS APPLICATION AT THE FINNISH ANTARCTIC MEASUREMENT STATION ABOA, AKI VIRKKULA, Risto Hillamo, Finnish Meteorological Institute, Air Quality Research, FIN-00880 Helsinki, Finland Pasi Aalto, Markku Kulmala, Aerosol and Environmental Physics Laboratory, University of Helsinki, FIN-00014 University of Helsinki, Finland.

3PB7 DESIGN AND EVALUATION OF THE LOVELACE QUAD-TRACK DIFFUSION DRYER, LARRY E. BOWEN, Lovelace Respiratory Research Institute, Albuquerque, NM.

3PB8 AN IDEAL PRE-FILTER FOR GAS ANALYZERS, CHRISTOF ASBACH, University of Minnesota, Minneapolis, MN Thomas A.J. Kuhlbusch, Institut fuer Energie- und Umwelttechnik, Duisburg, Germany Heinz Fissan, University Duisburg-Essen, Campus Duisburg, Germany.

3PB9 SIZE CHANGE OF COLLOIDAL NANOPARTICLES DISPERSED BY ELECTROSPRAY IN A HEATED FLOW, Kikuo Okuyama, Wuled Lenggoro, HYE MOON LEE, Chan Soo Kim, Manabu Shimada, Hiroshima University, Japan..

3PB10 AIR JET INDUCED RELEASE RATES OF SPHERICAL PARTICLES FROM CLOTH AND PLANAR SURFACES, ROBERT FLETCHER, Greg Gillen, National Institute of Standards and Technology, 100 Bureau Drive, Gaithersburg, MD 20899; Erin Ferguson, Clemson University, Chemistry Department, Clemson, SC 29632.

3PB11 DISTRIBUTION OF GAS HOLDUP IN A BUBBLE COLUMN, Wei Chen and Goodarz Ahmadi Department of Mechanical and Aeronautical Engineering Clarkson University Potsdam , NY 13699.

4:30 PM – 6:30 PM

3PC. Vehicular Exhaust and PM Analyzers

3PC1 MEASUREMENT OF IN-USE VEHICLE PARTICULATE MATTER EXHAUST USING EXTRACTIVE IN-PLUME MONITORING, Hampden Kuhns, CLAUDIO MAZZOLENI, Hans Moosmuller, Nicholas Nussbaum, Oliver Chang, Judith Chow, Peter Barber, and John Watson, Desert Research Institute, Reno, NV.

3PC2 ON-ROAD ENGINE EXHAUST MEASUREMENTS USING AN EEPS SPECTROMETER, ROBERT CALDOW and Jeremy J. Kolb, TSI Incorporated, 500 Cardigan Road, Shoreview, MN 55126-3996.

3PC3 PM MASS MEASUREMENT: AEROSOL INSTRUMENTS VERSUS FILTERS, MATTI MARICQ, Ning Xu, Richard Chase.

3PC4 CRUISER: A ROAD VEHICLE BASED MOBILE MEASUREMENT SYSTEM, GANG LU, Cris Mihele, Jeff Brook. Environment Canada, Toronto, Ontario, Canada..

3PC5 AN ULTRAVIOLET LIDAR AND TRANSMISSOMETER FOR THE ON-ROAD MEASUREMENT OF AUTOMOTIVE PARTICLE EMISSIONS, Hans Moosmüller, CLAUDIO MAZZOL