[share-ebook]CPET90 ENVIRONMENTAL AND ENERGY ENGINEERING MSc Eng Regulations are presented in programme code order

<< Buy This Book on Amazon >>

Chemical and Process Engineering postgraduate regulations

Faculty of Engineering

INDEX

Regulations are presented in programme code order. An alphabetical index of programme titles is as follows:

CPETXX	Biological and Bioprocess Engineering	(MSc(Eng))
CPET01	Environmental and Energy Engineering	(MSc(Eng))
CPET90	Environmental and Energy Engineering (For initial registration of a candidate for the Degree of PhD with Integrated Studies only)	(MSc(Eng))
CPET17	Process Fluid Dynamics	(MSc(Eng))
CPET03	Process Safety and Loss Prevention	(MSc(Eng))

CPET01 ENVIRONMENTAL AND ENERGY ENGINEERING (MSc (Eng)) (Full-Time)
CPET02 (Part-Time)

1.	A candidate shall take
(a)	CPE6003	F7	Research Methods in Environmental and Energy Engineering	15
	CPE6030	F7	Environment: Gaseous Emissions	15
	CPE6070	F7	Environment: Particulate Emissions	15
	CPE6080	F7	Environment: Liquid Effluents	15
	CPE6300	F7	Introduction to Fuels and Energy	15
	CPE6310	F7	Laboratory Practicals	15
(b)	units to the value of thirty credits from the following
	ARC6840	F7	Renewable Energy	15
	CPE6020	F7	Computational Fluid Dynamics	15
	CPE6050	F7	Fires and Explosions	15
	CPE6060	F7	Thermal Waste and Biomass Treatment Technologies	15
	CPE6130	F7	Particle Rate Processes	15
	CPE6140	F7	Environmental Protection	15
	CPE6290	F7	Nuclear Reactor Engineering Studies	15
	CPE6330	F7	Crystal Science and Engineering	15
	CPE6350	F7	Coal Combustion and Utilisation	15
	CPE6450	F7	Oil and Gas Utilisation	15
(c)	CPE6010	F7	Research Project	60
2.	A candidate who has a strong background in combustion and energy science (for example, a candidate with a first degree in Chemical Engineering) may be exempted by the Board from taking CPE6300 (Introduction to Fuels and Energy), and may substitute a unit selected from Regulation 1(b) above in its place.
3.	A candidate with a background in engineering laboratory work may be exempted by the Board from taking CPE6310 (Laboratory Practicals), and may substitute a unit selected from Regulation 1(b) above in its place.
4.	A candidate who has been awarded one hundred and twenty credits in respect of units listed at 1(a) and (b) above shall be eligible for the award of the Postgraduate Diploma in Environmental and Energy Engineering.
5.	A candidate who has been awarded sixty credits in respect of units listed at 1(a) and (b) above shall be eligible for the award of the Postgraduate Certificate in Environmental and Energy Engineering.

CPET03 PROCESS SAFETY AND LOSS PREVENTION (MSc (Eng)) (Full-Time)
CPET04 (Part-Time)

1.	A candidate shall take
(a)	CPE6001	F7	Elements of Risk and Major Hazards	45
(b)	units to the value of seventy-five credits from the following
	CPE6200	F7	Hazards in Process Plant Design and Operation	15
	CPE6240	F7	Applied Hazard and Operability Studies	15
	CPE6250	F7	Plant Reliability and Maintainability	15
	CPE6260	F7	Human Behaviour and Human Error	15
	CPE6270	F7	Process Safety Management and Loss Prevention	15
	CPE6280	F7	Computer Control: Safe Practice	15
(c)	CPE6390	F7	Dissertation Project	60
2.	A candidate who has been awarded one hundred and twenty credits in respect of units listed at 1(a) and (b) above shall be eligible for the award of the Postgraduate Diploma in Process Safety and Loss Prevention.
3.	A candidate who has been awarded sixty credits in respect of units listed at 1(a) and (b) above shall be eligible for the award of the Postgraduate Certificate in Process Safety and Loss Prevention.

CPET17 PROCESS FLUID DYNAMICS (MSc (Eng)) (Full-Time)
CPET18 (Part-Time)

1.	A candidate shall take
(a)	CPE6002	F7	Research Methods in Chemical Engineering	15
	CPE6020	F7	Computational Fluid Dynamics	15
	CPE6160	F7	Chemical Fluid Dynamics	15
	CPE6170	F7	Process Fluidics	15
(b)	units to the value of sixty credits from the following, not less than thirty credits being selected from (i) and not more than ten being selected from (iii)
(i)	AMA305	F6	Fluid Mechanics I	10
	CPE303	F6	Transport Processes	10
	CPE6130	F7	Particle Rate Processes	15
	CPE6180	F7	Advanced Computational Fluid Dynamics	15
	CPE6190	F7	Flow Visualisation Laboratory	15
	CPE6330	F7	Crystal Science and Engineering	15
(ii)	CPE6030	F7	Environment: Gaseous Emissions	15
	CPE6050	F7	Fires and Explosions	15
	CPE6060	F7	Thermal Waste and Biomass Treatment Technologies	15
	CPE6070	F7	Environment: Particulate Emissions	15
	CPE6080	F7	Environment: Liquid Effluents	15
	CPE6140	F7	Environmental Protection	15
(iii)	MEC208	F5	Fluids Engineering	10
	MEC311	F6	Engineering Fluid Mechanics	10
(c)	CPE6010	F7	Research Project	60
2.	A candidate who has been awarded one hundred and twenty credits in respect of units listed at 1(a) and (b) above shall be eligible for the award of the Postgraduate Diploma in Process Fluid Dynamics.
3.	A candidate who has been awarded sixty credits in respect of units listed at 1(a) and (b) above shall be eligible for the award of the Postgraduate Certificate in Process Fluid Dynamics.

CPET90 ENVIRONMENTAL AND ENERGY ENGINEERING (MSc(Eng))
(For initial registration of a candidate for the Degree of PhD with Integrated Studies only)

1 2 NextPage

Download links for : << CERTIFICATION OF TOXIC CHEMICAL RELEASE REPORTING >>

"CPET90 ENVIRONMENTAL AND ENERGY ENGINEERING MSc Eng Regulations are presented in programme code order"

How to Download
You may need eMule or Bittorrent to download ebook torrents or emule links.

Report Dead Link
Please leave a comment to report dead links, so that someone else may update new links.

Search More...

[share-ebook]CPET90 ENVIRONMENTAL AND ENERGY ENGINEERING MSc Eng Regulations are presented in programme code order

Related Books

Books related to :

<< CERTIFICATION OF TOXIC CHEMICAL RELEASE REPORTING

DTRA s Chemical and Biological Warfare Issues for DoD Air War College Core Elective This is the only course of its kind at any of DoD s joint senior service schools >>

See all the reviews

CPET90 ENVIRONMENTAL AND ENERGY ENGINEERING MSc Eng Regulations are presented in programme code order